Under the counter fittings and parts
1/4" Nipple for attaching two 1/4" housings together
Mounting Clips typically used for attaching inline filter to surfaces such as wall or brackets
1/4"and 3/8" inline Non Return Valve
Mounting Elbow allows the 1/4" piping to be attached to and feed into containers such as tanks or buckets
Storage tanks for Reverse Osmosis and Nano Filtration systems
24 Volt and 12 Volt Booster pump for under the counter RO or Nanofiltration system
Electronic meters used to measure the Total Dissolved Solids (TDS) in a water source.
Manual shut off valves for between 1/4" pipe sections or for between housings and pipe
Leak Detector specifically designed for under the counter filter systems that use the 1/4 Inch (6mm) piping. Helps to stop leaks before they can cause damage
Non-return Valves for membrane housings. Allows water to flow in out in one direction, and stops the water from flowing back in from the other direction.
For taking 1/4" Inch piping to another diameter piping or thread size
Fittings for joining to pieces of either 1/4" or 3/8" pipe together. Available in both elbow and straight types
Pipe to thread elbows. For connecting pipe to standard housings and membrane housings
Typically part of an under the counter RO or Nano system with a booster pump.
Acts a shut off valve for the drain when the high pressure switch on the system is tripped.
Straight connections for joining pipe to thread.
Available in both male and female thread.
Supply connector and ball valve for under the counter RO and Nanofiltration systems
Part of the standard Under the counter RO & Nano filtration systems
Flow restrictor for the drain pipes on under the counter ROs and Nanos
High and low Pressure switches for under the counter RO's and Nano's with booster pumps.
Tap for the under the counter RO and Nanofiltration systems.
Pressure Reducing valve, recommended if you want to install an under the counter system and you suspect your water pressure may reach 6 bars or more.